Table of Contents
Advertisement
Note:
• Disabling power saving settings on connected sources helps maintain accessibility to the
video stream.
13. Configure the MoIP Receivers
1. For displays that only support 1080p and/or HDCP 1.4, set the corresponding receiver to
match this requirement to allow video to pass. 4K video input into transmitters will not
show on 1080p and/or HDCP 1.4 displays.
2. Set each receiver individual to
this will allow the HDR metadata to pass resulting in 4K HDR 30Hz.
3. Set each receiver to 2160p 30Hz to displays that are 4K however; do not support HDR.
4. If desired, choose drop down for
is the most common for the top row of video walls where TVs are hung upside down due to
bezel logos.
5. When using a receiver with
downmixing (B-900-MOIP-4K-RX-
2AC), you can configure dowmixing
mode (Auto, 2CH, or Bypass) and
audio latency (up to 250 milliseconds).
Passthrough
for the displays capable of support 4K HDR as
Rotation
between 90, 180, or 270 degrees. 180 degrees
19
Advertisement
Table of Contents
