Table of Contents
Advertisement
3. Verify Jumbo Frame
SETTINGS >
Choose
default value is 9216 the maximum is acceptable.
4. Set up the MoIP Controller
Claim
MoIP controller
IMPORTANT:
This is
1. For existing OvrC locations:
a. Log into OvrC and go to
b. A new device will show ready to add. Click "+ Device", > 'Media Devices' and follow the
prompts to claim the MoIP controller.
2. New OvrC locations
a. Document the MoIP Controller MAC Address and Service Tag on the box or on the
bottom of the device
b. Log into OvrC and go to Customer > Devices, click "+ Device"
c. Manually enter MAC Address and Service Tag to claim the device
PORTS, then verify
Jumbo Frame
on OvrC and access the local UI.
REQUIRED
for firmware maintenance.
Customer>Devices
14
is set to greater than 8,000 Bytes. The
Advertisement
Table of Contents
