Page 1
Chef Bases KCB-53-2M KCB-60-2M KCB-74-4M KCB-83-4M KCB-96-4M Visit us on the web at www.mvpgroupcorp.com 5659 Royalmount Ave. 12000 Biscayne Blvd. Ste 108 Montreal,QC H4P2P9 Miami,FL 33181...
Installation 1. INDOOR USE ONLY • This unit is intended for indoor use only. 2. FOR LOCATION • Be sure that the location is strong enough to support the total weights of the unit and the content. • Keep the unit away from sunlight and other heat generating equipment. •...
Operation 1. The temperature controller (thermostat) is located on the upper left of the back side of the cabinet interior. 2. The controller has been preset "NORMAL" position at the factory. 3. Set the control-knob toward "COOL" for higher temperature and "COLD"...
Troubleshooting Problem Possible Cause Action Power connection failure. Check Power Cord and plug it in. Compressor will not start Power switch is in off position. Change it on position. Temperature set point is too high. Temperature set point is too high. Correct temperature set point.
Page 7
MEMO Visit us on the web at www.mvpgroupcorp.com...
Need help?
Do you have a question about the KCB-53-2M and is the answer not in the manual?
Questions and answers