INSTALLATION 1. INDOOR USE ONLY * This unit is intended for indoor use only. 2. FOR LOCATION Be sure that the location has enough floor space to support the total weight of the unit and its contents. Keep the unit away from sunlight and other heat generating equipment. The minimum clearance between the back of the unit should be at least 7 inches from wall.
MAINTENANCE & CLEANING 1. To maintain proper refrigeration performance, the Condenser Fans should be checked monthly and cleaned with a soft brush or vacuum cleaner as needed. 2. Wait at least 6 minutes after unplugging the unit before re-starting. 3. The interior and exterior of the unit can be cleaned using warm water. Do not use an abrasive cleaner in order to prevent scratches on the surfaces.
TROUBLE SHOOTING Problem Possible Cause Action Power connection failure Check Power Cord and plug it in Compressor does not start Power Switch is in OFF position Move Power Switch to ON position (KUCF-2, 60, 3 ) Temperature set point is too high Correct temperature set point The door is opened too frequently Loading of too much warm or moist...
Need help?
Do you have a question about the KST-1 and is the answer not in the manual?
Questions and answers