Advertisement
Cleaning Your Hard Floors
NOTE: Thoroughly sweep or vacuum floor prior to cleaning with your steam mop.
YOUR STEAM MOP IS DESIGNED TO CLEAN HARD FLOORING SUCH AS CERAMIC
TILE, LAMINATE, MARBLE, STONE, AND SEALED HARDWOOD FLOORS. USE OF YOUR
STEAM MOP ON WAXED OR SOME UNWAXED FLOORS MAY RESULT IN A DIMINISHED
GLOSSINESS. THE STEAM MOP IS NOT FOR USE ON UNSEALED FLOORS. FOR BEST
RESULTS, TEST IN AN INCONSPICUOUS AREA AND CHECK THE CARE INSTRUCTIONS
FROM YOUR FLOORING MANUFACTURER. DON'T STAND STATIONARY AND KEEP THE
MOP MOVING WHEN DISPENSING STEAM.
1
Plug machine
into a properly
grounded outlet.
NOTE: Your steam mop may have already come assembled with a mop pad on the foot.
If not, refer to instructions on page 6 in the "Attaching Microfibre Mop Pads" section to
learn how to attach the mop pad.
4
Push the trigger
underneath the handle
of the handheld pod to
release steam.
6
8 BISSELL.com
2
Make sure the STEAM READY
light is solid before selecting the
appropriate steam level based on
your hard floor cleaning needs.
5
For best results to
sanitize an area of your
floor, use the microfibre
cloth pads and slowly
and evenly move your
steam mop back and
forth at least three
times over the area
using continuous steam.
Remove the pad after
use and wash.
3
Step on the side of
the foot to recline the
body of the machine
to begin cleaning.
To easily manoeuvre and clean
tight spaces such as baseboards,
behind the toilet and around
furniture, take advantage of the
swivel steering.
7
When finished cleaning,
turn OFF the machine by
pressing the PAUSE button
and unplugging it
Advertisement
