Advertisement
Hardware
HDMI
Power Management
12V Trigger
Works with SONOS
Multi Zone
Zone 2
Remote Play Zone
Miscellaneous
Tuner
Remote ID
Firmware Update
Initial Setup
Lock
Factory Reset
Change the settings of the HDMI function.
Change the settings for the power-save function.
Set the 12V trigger output setting to each input.
Change the settings to connect with the Sonos Connect.
Change the settings for Zone 2.
Change the settings for remote play.
Change the settings for Tuner.
Change the remote controller ID.
Change the settings for Firmware Update.
Make the initial setup from the setup menu.
Lock the Setup menu so that the settings cannot be changed.
All the settings are restored to factory defaults.
Setup
p113
p114
p116
p116
p118
p118
p119
p119
p119
p120
p120
p120
99
Advertisement
