Related Manuals for Marvel 30ARM
Summary of Contents for Marvel 30ARM
- Page 1 MARVEL Installation Operation Maintenance Instructions Refrigerator Models 30ARM 61ARM 3OARM 6OARM 6ADAM...
-
Page 2: Table Of Contents
Recommended Rough in Opening Dimensions maintaining, or operating this appliance. For Models 30ARM & 3OARM......6 Dimensions For Model 30ARM Overlay Door..7 Recommended Rough in Opening Dimensions For Model 30ARM Overlay Door......7 Dimensions For Models 61ARM & 6OARM..... 8 Recommended Rough in Opening Dimensions For Models 61ARM &... -
Page 3: Unpacking Your Refrigerator
UNPACKING YOUR REFRIGERATOR Remove Packaging Warranty Registration Your refrigerator has been packed for shipment with It is important you send in your warranty registration card im- all parts that could be damaged by movement securely mediately after taking delivery of your refrigerator or you can fastened. -
Page 4: Installing Your Refrigerator
3 prong grounded receptacle required. erator condenser. For this reason it is important this area to not be obstructed and be kept clean. Marvel does not rec- ommend the use of custom made grilles as air flow may be Do not use an extension cord restricted because of inadequate openings. -
Page 5: Using Your Microsentry™ Refrigerator Control
ON/OFF button for three seconds. sensor alarm will sound. “E1” will flash on the display, and an alarm will sound. Please call Marvel Customer Service or Set temperature your dealer if this error code is displayed. -
Page 6: Alarm Mute
USING YOUR MicroSentry™ REFRIGERATOR CONTROL Alarm Mute Press any key to mute the audible portion of an alarm,. NOTE-This action will only mute the alarm. If the condition that caused the alarm continues, the alarm code will contin- ue to flash and will sound for 20 seconds every 60 minutes. Turning Refrigerator Off To turn refrigerator off, press and hold “ON/OFF”... -
Page 7: Dimensions For Models 30Arm & 3Oarm
(87 to 87.6 cm) 3” to 3-1/4” 21-3/16” 7.62 to 8.26cm) (53.82 cm) Recommended Rough in Opening Dimensions, Models 30ARM & 3OARM Electrical Requirements: 115 volts, 3.3 amps running max. 15 amp dedicated circuit required. 3 prong grounded receptacle required. -
Page 8: Dimensions For Model 30Arm Overlay Door
(87 to 87.6 cm) 3” to 3-1/4” 21-3/16” 7.62 to 8.26cm) (53.82 cm) Recommended Rough in Opening Dimensions, Model 30ARM Overlay Door Electrical Requirements: 115 volts, 3.3 amps running max. 15 amp dedicated circuit required. 3 prong grounded receptacle required. -
Page 9: Dimensions For Models 61Arm & 6Oarm
DIMENSIONS FOR MODELS 61ARM & 6OARM 47” (119.38 cm) 25-11/16” (65.28 cm) 26” 23-7/8” (66.04 cm) (60.66 cm) 24-1/16” (61.11 cm) 34-1/4” to 34-1/2” (87 to 87.6 cm) 3” to 3-1/4” 22” (55.88 cm) 7.62 to 8.26cm) Recommended Rough in Opening Dimensions, Models 6OARM & 61ARM Electrical Requirements: 115 volts, 3.3 amps running max. -
Page 10: Dimensions For Model 61Arm Overlay Door
DIMENSIONS FOR MODEL 61ARM WITH OVERLAY DOOR 47” (119.38 cm) 24-1/16” 23-7/8” (61.12 cm) (60.66 cm) 23-5/16” (59.21 cm) 34-1/4” to 34-1/2” (87 to 87.6 cm) 3” to 3-1/4” 22” 7.62 to 8.26cm) (55.88 cm) Recommended Rough in Opening Dimensions, Model 61ARM Overlay Door Electrical Requirements: 115 volts, 3.3 amps running max. -
Page 11: Dimensions For Model 6Adam
DIMENSIONS FOR MODEL 6ADAM 47” (119.38 cm) 25-11/16” (65.28 cm) 26” (66.04 cm) 23-7/8” (60.66 cm) 24-1/16” (61.11 cm) 31-5/8” to 31-7/8” (80.31 to 80.98 cm) 22” 3” to 3-1/4” (55.88 cm) 7.62 to 8.26cm) Recommended Rough In Opening Dimensions, Model 6ADAM Electrical Requirements: 115 volts, 3.3 amps running max. -
Page 12: Dimensions For Model 6Adam Overlay Door
DIMENSIONS FOR MODEL 6ADAM WITH OVERLAY DOOR 47” (119.38 cm) 24-1/16” 23-7/8” (61.12 cm) (60.66 cm) 23-5/16” (59.21 cm) 31-5/8” to 31-7/8” (80.31 to 80.98 cm) 3” to 3-1/4” 22” 7.62 to 8.26cm) (55.88 cm) Recommended Rough In Opening Dimensions, Model 6ADAM Overlay Door Electrical Requirements: 115 volts, 3.3 amps running max. -
Page 13: Full Overlay Panel Installation Instructions
Figure 4 parallel to top and sides of Figure 3 refrigerator Model 14-5/8” 30-5/16” 30ARM Step 2: Remove door (37.13cm) (76.99cm) Remove the top hinge pin from the hinge with an 1/8” 23-5/8” 30-5/16” 61ARM allen wrench. Remove the door by angling the top of the (59.99cm) - Page 14 FULL OVERLAY PANEL INSTALLATION INSTRUCTIONS Step 6: Drill holes in overlay panel Step 8: Assemble the lock parts Remove the hinge adapter bushings from the top and Two (2) lock extensions are supplied with the lock. Use bottom door hinge adapters. (See Figure 8).Using the the longer extension for a 3/4”...
- Page 15 FULL OVERLAY PANEL INSTALLATION INSTRUCTIONS Step 9: Secure overlay panel to the door. With the #8 wood screws provided fasten the overlay panel to the door. (See Figure 7). Clearance hole through door gasket channel Step 10: Install lock cam (Models with locks only). Attach the lock cam to the back of the lock assembly with the phillips head machine screw provided.
-
Page 16: Care And Cleaning
CARE AND CLEANING Condenser Air Flow The machine compartment located beneath the cabinet does not require frequent cleaning; however, satisfactory performance depends on adequate ventilation. Be sure nothing obstructs the required air flow openings in front of the cabinet. At least once or twice a year, brush or vacuum lint and dirt from the front grille openings. -
Page 17: Troubleshooting Guide
If Service is Required: Date of Purchase • If the product is within the first year warranty period please call Marvel Customer Service at 800.223.3900 Dealer’s name for directions on how to obtain warranty coverage in your Dealer’s Address area. -
Page 18: Household Product Warranty
Limited One Year Parts and Labor Warranty Not Supplied or Designated by Marvel Marvel warrants that it will supply all necessary parts and The above warranties also do not apply if: labor to repair or replace in the end user’s home or office, any component which proves to be defective in material •... -
Page 19: Appendix A Additional Microsentry™ Features
APPENDIX A, ADDITIONAL MicroSentry™ FEATURES Information Menu: Keypad Lockout Feature (Loc): This feature The following features are available on the Information is useful for prohibiting changes in the Menu. temperature set point or accidentally turning • Current Temperature the unit off. Press and hold the “SET” key to display the cur- •... - Page 20 Northland-Marvel P .O. Box 400 1260 E. Van Deinse St. Greenville MI 48838 800.223.3900 41011753-EN Rev G All specifications and product designs subject to change without notice. Such revisions do not entitle 11/10/09 the buyer to corresponding changes, improvements, additions, replacements or compensation for...
Need help?
Do you have a question about the 30ARM and is the answer not in the manual?
Questions and answers