Appendix; Additional Information - Samsung HT-J5100K User Manual

Appendix

Additional Information

Notes
Connections
HDMI OUT
~ Certain HDMI output resolutions may not work,
depending on your TV.
~ A long HDMI cable may cause screen noise. If this
occurs, set HDMI Deep Colour to Off in the menu.
Settings
TV Aspect Ratio
~ Depending on the disc type, some aspect ratios
may not be available.
~ If you select an aspect ratio and option which is
different than the aspect ratio of your TV screen, the
picture might appear to be distorted.
~ If you select 16:9 Original, your TV may display 4:3
Pillarbox (black bars on the sides of the picture).
BD Wise (Samsung Products only)
~ When BD Wise is on, the Resolution setting
automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.
~ If the product is connected to a device that does
not support BD Wise, you cannot use the BD Wise
function.
~ For proper operation of BD Wise, set the BD Wise
option in both the product and the TV to On.
Digital Output
~ Be sure to select the correct Digital Output or you
will hear no sound or just loud noise.
~ If the HDMI device (AV receiver, TV) is not
compatible with compressed formats (Dolby Digital,
DTS), the audio signal outputs as PCM.
~ Regular DVDs do not have BONUSVIEW audio and
Navigation Sound Effects.
~ Some Blu-ray Discs do not have BONUSVIEW
audio and Navigation Sound Effects.
~ This Digital Output setup does not affect the
analogue (L/R) audio or HDMI audio output to your
TV. It affects the optical and HDMI audio output
when your product is connected to an AV receiver.
~ If you play MPEG audio soundtracks, the audio
signal outputs as PCM regardless of your Digital
Output selections (PCM or Bitstream).
~ Digital Output can be activated when Speaker
Selection is set to TV Speaker.
Anynet+ (HDMI-CEC)
~ Depending on your TV, certain HDMI output
resolutions may not work. Please refer to the user
manual of your TV.
~ This function is not available if the HDMI cable does
not support CEC.
~ If your Samsung TV has an Anynet+ logo, then it
supports the Anynet+ function.
BD Data Management
~ In the external memory mode, disc playback may
be stopped if you disconnect the USB device in the
middle of playback.
~ Only those USB devices formatted in the FAT file
system (DOS 8.3 volume label) are supported.
We recommend you use USB devices that support
the USB 2.0 protocol with 4 MB/sec or faster read/
write speeds.
~ The Resume Play function may not work after you
format the storage device.
~ The total memory available to BD Data
Management may differ, depending on conditions.
DivX® Video On Demand
~ For more information about DivX(R) VOD, visit
"http://vod.divx.com".
Speaker Settings
~ When Speaker Selection is set to TV Speaker,
audio is produced by the TV speakers.
HDMI audio
~ When HDMI audio is output to the TV speakers, it is
automatically down-mixed to 2 channels.
26
- English