Cleaning The Wheels; Cleaning Side Brushes - Shark AV1002AE Series Owner's Manual

MAINTENANCE
CLEANING SENSORS AND CHARGING PADS
CLEAN SENSORS AND CHARGING PADS AS NEEDED. With a dry cloth, gently dust off the sensors and
pads located on the bottom of the robot and on the base.
IMPORTANT: The robot uses cliff sensors to avoid stairs and other steep drops. Sensors may work less effectively when
they are dirty. For best results, clean sensors regularly.

CLEANING SIDE BRUSHES

CLEAN SIDE BRUSHES AS NEEDED.
NOTE: Remove and replace any side brushes that are bent or damaged. To remove a brush, lift it off its peg.
s h a r kc l e a n . c o m
Carefully unwind and remove any string or hair
wrapped around brushes.
Gently wipe brushes with a dry cloth. To reinstall,
snap the brushes over the pegs. Spin the brushes
manually to make sure they are installed correctly.
MAINTENANCE

CLEANING THE WHEELS

REMOVE AND CLEAN THE FRONT CASTER WHEEL AS NEEDED.
See sharkaccessories.com for replacement parts.
Pull the Front Caster Wheel from its housing and
remove any debris buildup.
NOTE: Tools may be required to pry off front caster wheel.
NOTE: Brush not included.
Periodically clean the drive wheels and the
housing around them. To clean, rotate each drive
wheel while dusting.
Clean the wheel housing, then reinsert the
caster wheel.
s h a r kc l e a n . c o m