Table of Contents
Advertisement
Appliance settings
en
Wipe the rubber seal dry.
■
Leave the door and detergent
■
drawer open so that any residual
water can evaporate. ~ Page 25
Always wait until the programme
■
ends, as the appliance could still be
locked. Then switch the appliance
on and wait for it to unlock.
If the display panel goes off at the
■
end of a programme, the energy-
saving mode is active. Press any
button to activate the panel.
Q
Appliance settings
a n c e
A p p l i
You can change the following settings:
The volume of the buttons and
■
information signals (e.g. at the end
of the programme)
Select/deselect the appliance's
■
automatic switch-off function.
~ Page 7
You will need to activate the setting
mode in order to change these settings.
24
Activating the setting mode
Press the # button.
1.
The appliance is switched on and
the Cottons programme is shown at
position 1.
Press the Temperature button and,
2.
at the same time, turn the
programme selector clockwise to
position 2. Release the button.
The setting mode is activated and the
preset volume for the information
signals appears in the display panel.
You can now change the settings:
Changing the signal volume
Use the Finished in + or - button to
change the following settings at the
corresponding programme selector
positions:
2: The volume of the information
■
signals and/or
3: The volume of the button signals.
■
i n g s
s e t t
Exit setting mode or:
Selecting/deselecting the
appliance automatic switch-
off
With the programme selector in position
4, press the Finished in + or - button to
switch the "Automatic switch-off"
function on or off.
0 = off,
1 = quiet,
2 = medium,
3 = loud,
4 = very loud
Advertisement
Chapters
Table of Contents
