Table of Contents
Advertisement
Press the Finished in button
2.
repeatedly until the required number
of hours is displayed.
The setting values are
Note:
increased using the Finished in +
button, and decreased using the
Finished in - button.
Press the A button.
3.
The programme starts.
The selected number of hours
(e.g. 8 h) is shown in the display
panel and counts down until the
wash programme starts. The
duration of the programme is then
displayed.
The length of the programme is
Note:
automatically adjusted when the
programme is running. Changes to the
default programme settings or
programme settings may also change
the programme duration.
After starting the programme (if a
Finished in time has been selected and
the wash programme has not yet
started), you can change the
preselected number of hours as follows:
Press the A button.
1.
Use the Finished in - or + button to
2.
change the number of hours.
Press the A button.
3.
After starting the programme, you can
add or remove laundry if necessary.
~ Page 23
Additional programme settings
\
Additional programme
settings
i o n a l
A d d i t
m m e
p r o g r a
An overview of all additional settings,
which can be selected depending on
the programme, can be found from
~ Page 14.
EcoPerfect F
Energy-optimised washing by reducing
the temperature while achieving a
washing result that is consistent with the
selected programme, without the
EcoPerfect F setting.
SpeedPerfect G
Washing in a shorter time while
achieving a washing result that is
consistent with, but uses more energy
than, the selected programme, without
the SpeedPerfect G setting.
Do not exceed the maximum
Note:
load.
Overview of programmes ~ Page 14
Easy-iron
p
Reduces creasing thanks to a special
spin sequence followed by fluffing and
reduced spin speed.
The washing's residual moisture
Note:
is increased.
Water Plus
Z
Higher water level and additional rinse
cycle for particularly sensitive skin and/
or for areas with very soft water.
en
i n g s
s e t t
19
Advertisement
Chapters
Table of Contents
