Ceiling Mount Installation
If you wish to use a third party ceiling mount kit, please ensure the screws used
to attach a mount to the projector meet the following specifications:
•
Screw type: M4 x 10L
Note: Please note that damage resulting from incorrect
installation will void the warranty.
Warning:
If you buy a ceiling mount from another company, please be sure to use
•
the correct screw size. Screw size will vary depending on the thickness of
the mounting plate.
Be sure to keep at least 10 cm gap between the ceiling and the bottom of
•
the projector.
Avoid installing the projector near a heat source.
•
346.34
38.01
247.81
35
Unit: mm