Homelegance 196H4522 3 Series Assembly Instruction Manual page 3

ASSEMBLY INSTRUCTIONS FOR DRAWER REMOVAL AND REINSTALL
TO REMOVE DRAWER:
STEP 1 : EXTEND THE BOX DRAWER TO ITS FULL EXTENSION.
STEP 2 : LOCATE THE DRAWER SLIDE LOCK ON EACH SIDE OF THE DRAWER BOX.
PULL UP THE LOCK ON THE LEFT SIDE OF THE DRAWER BOX AND PUSH DOWN
THE LOCK ON THE RIGHT SIDE OF THE DRAWER BOX IN THE SAME TIME AND
PULL DRAWER STRAIGHT OUT UNTIL SLIDE DRAWER MEMBERS DISENGAGE
FROM CABINET MEMBERS.
STEP 3 : REMOVE THE DRAWER.
Lock
Left side view
PULL UP
STEP 2
TO REINSTALL DRAWER :
MAKE SURE THE DRAWER WILL BE RE-INSTALL TO ITS ORIGINAL POSITION.
STEP 1 : INSERT DRAWER BY PULLING TRACK ON THE LEFT AND RIGHT CABINET MEMBERS
ALL THE WAY FORWARD (INCLUDING BALL BEARING RACK)
STEP 2 : ALIGN TRACKS ON DRAWER WITH SLIDERS AND PUSH IN THE DRAWER
UNTIL THERE IS AUDIBLE "CLICK" SOUND.
STEP 3 : CHECK FOR PROPER ALIGNMENT BY INSPECTING DRAWER FRONT MARGINS
FOR SPACING AND SQUARENESS.
OPEN AND CLOSE SLOWLY SEVERAL TIMES TO ENSURE THE PROPER INSTALLMENT.
IF THERE IS ANY UNEVEN, PLEASE REPEAT STEP OF REMOVAL AND REINSTALL THE DRAWER.
STEP 2
MADE IN MALAYSIA
ASSEMBLY INSTRUCTIONS
DESCRIPTION : DESK
196H4522-15 / 196H4522WH-15
ITEM NO :
FOR CASEGOODS
STEP 1
STEP 3
STEP 1
Lock
Right side view
Bearing
PUSH DOWN
STEP 2
STEP 3
3 OF 3