CDA CDI6121 Use And Maintenance page 16

In order to change the rinse aid level,
follow the steps below before turning
on the machine:
1. Press and hold down the 'Programme
selection' button
2. Press the 'On/Off' button to switch on
the dishwasher
3. Keep the programme selection button
pressed until "rA" shows on the
display and then disappears
4. To adjust the level, press the
programme selection button until the required level is shown on
the display, as listed in the table on below.
5. To store the selected rinse aid level, press the 'On/Off' button.
Level Brightener Dose
1 Rinse-aid not dispensed
2 1 dose is dispensed
3 2 doses are dispensed
4 3 doses are dispensed
5 4 doses are dispensed
If the dishes are not drying properly or are spotted with food
debris, dirt etc., increase the rinse aid level. If blue stains appear
on your dishes, decrease the rinse aid level.
Always refill the rinse aid when the rinse aid indicator light on the
control panel is illuminated.
16
Indicator
r1 is shown the on display.
r2 is shown the on display.
r3 is shown the on display.
r4 is shown the on display.
r5 is shown the on display.