Antique Automobile Radio 442231B Operating Instructions

Antique Automobile Radio 442231B Operating Instructions

Advertisement

Release Date
March 2014
1963-64 CHEVY II
and 1963-64 CORVAIR
Add
our
Bluetooth®
incoming calls and place outgoing calls with compatible
phones — all without having to fumble around for your cell
phone. You can also stream music from any compatible
phone or tablet — use the dedicated keys to skip or replay
tunes. Built in USB 2.1 Amp charger. NFC simple pairing
function.
ANTIQUE AUTOMOBILE RADIO, INC.
700 TAMPA RD. Palm Harbor, FL 34683 USA (727) 785-8733
AM/FM STEREO
RADIO INSTALLATION
OPERATING INSTRUCTIONS
Model 442231B
1
adapter
kit
For HELP, Questions or Comments email:
support@radiosforoldcars.com
AND
AM/FM9.2
option!
Answer

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 442231B and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Antique Automobile Radio 442231B

  • Page 1 — use the dedicated keys to skip or replay tunes. Built in USB 2.1 Amp charger. NFC simple pairing function. ANTIQUE AUTOMOBILE RADIO, INC. 700 TAMPA RD. Palm Harbor, FL 34683 USA (727) 785-8733 For HELP, Questions or Comments email:...
  • Page 2 CONGRATULATIONS! You have one of the most unique and sophisticated radios ever built! It is designed for a long trouble free life and quality sound. Our objective is to preserve the original fit, functions and appearance of your radio while providing superior sound using the best of the latest digital technology.
  • Page 3 Your radio has a 12 pin connector for the speakers, power, and options. See inset below for more details. There is one red (fused) wire. This is the main power input. It should be connected to the 12 volt Accessory circuit. There is a green wire that is used for the dial light.
  • Page 4 INSTALLATION If you intend to use our Bluetooth® adapter kit install the extension cable provided with the kit. Refer to the Bluetooth® instructions . Mount the radio in the dash using the two 7/16” shaft nuts. Take care not to cross-thread or over-tighten them. Finger tight plus ½...

Table of Contents