Configurable And Readable Parameters; Kit Contents; System Requirements - Safran STIM277H User Manual

1.2

Configurable and readable parameters

Configurable parameters:

Output format (angular rate, incremented angle etc.)

Datagram format

Sampling rate

Bandwidth/ Low pass filter frequency

RS422 transmission bit rate

Number of stop bits in datagram

Parity

Line/ Datagram termination
Readable parameters:

Part number

Serial number

Firmware revision

Hardware revision

Gyro module diagnostics
Detailed diagnostic information includes RAM and flash checks, stack handling checks, status of internal voltage
supply references, and various parameter reports for each measurement axis are available in SERVICE mode.
Note: Time of Validity (TOV) and external trigger functionalities of STIM210/STIM277H are not supported by the EVK
PC-software.
2

Kit contents


PCI/PCIe kit:
o
PCI/PCIe to RS422 interface card
o
STIM210/STIM277H communication and power cable

USB kit:
o
USB to RS422 interface cable with USB power supply connector

Memory stick with:
o
PC software
o
User manual (this document) for evaluation kit

Tool for fixing connector of communication and power cable to the gyro module
Note that the evaluation kit does not include a STIM210/STIM277H gyro module. This must be ordered separately.
3

System requirements


Windows XP SP2 (or later), Windows Vista, Windows 7 (32/ 64bit) , Windows 10 (32/ 64bit)

PCI/PCIe kit:
o
1 free USB port and 1 free PCIe slot

USB kit:
o
2 free USB ports

Quad core processor recommended (when simultaneously logging data from two gyro modules)
DOK451 rev.2
Page 5 of 26