Table of Contents
Advertisement
Sensors – Your washing machine is so
intelligent
Load adjust
Depending on the type of textile and load, the load adjust
optimally adjusts the water consumption in each programme.
Aqua-Sensor depending on model
During the rinse cycle the Aqua sensor checks the degree
of turbidity (turbidity is caused by dirt and detergent residue)
of the rinsing water. The duration and the number of rinse cycles
depend on the turbidity of the water.
Load sensor/Load display
The load sensor detects the load level in the washing machine
when the door is open. This is indicated by a progressing bar on
the display panel.
To ensure that the load sensor measures all the laundry, the drum
²
must be empty before the washing machine is switched on.
Dosing recommendation
The dosing recommendation indicates a recommended
detergent dosage as a %, depending on the selected programme
and the detected load. The indicated % refers to the
recommendation of the detergent manufacturer.
By observing the recommended dosage, you will protect the
²
environment and reduce your household costs.
Unbalanced load detection system
The automatic unbalanced load detection system spins the
laundry several times to ensure even distribution.
For reasons of safety the speed is reduced or does not perform
a spin cycle if the washing is very unevenly distributed.
Distribute small and large items of washing in the drum. Faults,
²
what to do? ~ Page 40
33
Advertisement
Table of Contents
