Table of Contents
Advertisement
Ø
– If the buttons are held down, the set values automatically run
²
– The respective programme duration is displayed by selecting
Ø
²
Ø
16
Changing the Temperature, Spin, Finish in. Refer to
~ Page 28:
e.g. selecting and changing the Temperature:
c
70
60
1400
°C
50
b
The arrows on the display panel indicate which buttons are
used to change the settings. The settings are active without
acknowledgement and are displayed in the main menu.
through.
the programme. The programme duration is adjusted while
the programme is running if the programme duration requires
changing, e.g. due to changes in the programme settings/
options, foam detection, unbalanced load detection, the load
or soiling.
:
ecoPerfect
¦
for saving energy with a comparable washing effect to the
standard programme. When selected, the display lamp is lit.
The washing temperature is lower than the selected
temperature. For special hygiene requirements, it is
recommended that a higher temperature be selected or the
(
speedPerfect
speedPerfect
G
for a shorter wash time with a comparable washing effect to
the standard programme. Observe maximum load.
~ Page 22 When selected, the display lamp is lit.
c
2:31h
0
b
option be used for a 5 kg load.~ Page 16
:
c
c
b
Advertisement
Table of Contents
