Safety Instructions; Intended Use - Black & Decker EBCD704 Manual

Table of Contents

Advertisement

4
F
EBCD704
IMPACT DRILL
Technical data
Voltage
No-load speed
Max. torque
Chuck capacity
Max Drilling capacity
Steel/wood/Masonary
Weight
Charger
Input voltage
Output voltage
Current
Approx. charge time
Battery
Voltage
V
DC
Capacity
Ah
Type

Intended use

Your BLACK+DECKER EBCD704 - Impact drill, has been
designed for screwdriving applications and for drilling in wood,
metal and masonary. This tool is intended for consumer use
only.
V
18V (20V Max)
DC
Min
0-360/ 0-1400
-1
Nm
mm
mm
kg
V
220
220
AC
V
24
18
DC
400 mA
1A
Hours
4-5
1.5-2
BL2018**
20
2.0
Li-Ion

Safety instructions

General power tool safety warnings
Warning! Read all safety warnings and all
instructions. Failure to follow the warnings
EBCD704
and instructions listed below may result in
electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
45
The term "power tool" in all of the warnings listed below refers
10
to your mains operated (corded) power tool or battery oper-
ated (cordless) power tool.
10/25/10
1. Work area safety
0.9
a. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b. Do not operate power tools in explosive atmospheres,
220
such as in the presence of fl ammable liquids, gases
18
or dust. Power tools create sparks which may ignite the
2A
dust or fumes.
0.5-1
c. Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
BL1518**
20
2. Electrical safety
1.5
a. Power tool plugs must match the outlet. Never modify
Li-Ion
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodifi ed plugs
and matching outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
ENGLSIH
5
G
3

Advertisement

Table of Contents
loading

Table of Contents