Pioneer PDP-503CMX Service Manual page 69

5
COLOR TEMP (VIDEO OPTION)
Name
COLOR
IC102
TINT
MCONTRAST
MBRIGHT
R HIGH
G HIGH
IC30
B HIGH
R LOW
G LOW
B LOW
COLOR MODE2 (VIDEO OPTION)
Name
COLOR
IC102
TINT
MCONTRAST
MBRIGHT
R HIGH
G HIGH
IC30
B HIGH
R LOW
G LOW
B LOW
Calculation of Adjustment Value in Service Factory Mode
• An actual adjustment value in Service Factory mode is the addition of the REFERENCE adjustment value and OFFSET adjustment
value, subtracted by the OFFSET reference value (values indicated in brackets in the above tables).
Note: As for the items that do not have OFFSET adjustment values (R SIDE MASK LEV, G SIDE MASK LEV, as well B SIDE MASK
LEV of the SIDE MASK LEVEL items, and X-SUS-B, X-SUS-G, Y-SUS-B, Y-SUS-G, V-SUS, and V-OFFSET of the DIGITAL
items), the REFERENCE adjustment value becomes the actual adjustment value.
• As for COLOR MODE 2 and COLOR TEMP, the adjustment value of the selected mode subtracted by its OFFSET reference value
(value indicated in brackets in the above tables) becomes the OFFSET value. Adding this value to the adjustment value of each
adjustment item in RGB2 becomes the final adjustment value for the RGB2 devices (IC30 and IC102).
Actual Calculation Examples
• Each adjustment value of SLOT/ RGB 1/RGB2/DIGITAL
(REFERENCE value)
+
{ (OFFSET value) – [OFFSET reference value] } ... Calculation of a value to be added as OFFSET
• COLOR MODE2 OFFSET value
{ (COLOR MODE2 adjustment value) - [OFFSET reference value] } ... Calculation of a value to be added as OFFSET for COLOR MODE2
Note: Add it only when COLOR MODE2 is selected.
• COLOR TEMP OFFSET value
{(COLOR TEMP adjustment value) - [OFFSET reference value] } ... Calculation of a value to be added as OFFSET for COLOR TEMP
Note: Add it only when COLOR TEMP 1,2,4, or 5 is selected.
Perform the addition in the normal operation, menu mode and COLOR TEMP adjustment mode of the Service Factory mode (in item
VIDEO OPTION), and add the OFFSET value of the selected setting.
The addition of the COLOR TEMP OFFSET value is not needed in Integrator mode or in Service Factory mode (except for COLOR
TEMP adjustment mode,) because the unit operates with the COLOR TEMP 3 settings.
5
6
OSD Display Name RS-232C Command
COLOR
TINT
CONTRAST
BRIGHT
R. HIGH
G. HIGH
B. HIGH
R. LOW
G. LOW
B. LOW
OSD Display Name RS-232C Command
COLOR
TINT
CONTRAST
BRIGHT
R. HIGH
G. HIGH
B. HIGH
R. LOW
G. LOW
B. LOW
PDP-503CMX
6
7
Service Factory Operation
[OFFSET Reference Value]
VOP-CT-3
VOP-CT-4
VOP-CT-1
VOP-CT-2
VOP-CT-5
VOP-CT-6
VOP-CT-7
VOP-CT-8
VOP-CT-9
VOP-CT-10
Service Factory Operation
[OFFSET Reference Value]
VOP-CM2-3
VOP-CM2-4
VOP-CM2-1
VOP-CM2-2
VOP-CM2-5
VOP-CM2-6
VOP-CM2-7
VOP-CM2-8
VOP-CM2-9
VOP-CM2-10
7
8
A
Adjustment Range
0 to 255 [128]
0 to 255 [128]
0 to 255 [128]
0 to 255 [128]
0 to 255 [255]
0 to 255 [255]
0 to 255 [255]
0 to 255 [128]
0 to 255 [128]
0 to 255 [128]
B
Adjustment Range
0 to 255 [128]
0 to 255 [128]
0 to 255 [128]
0 to 255 [128]
0 to 255 [255]
0 to 255 [255]
0 to 255 [255]
0 to 255 [128]
0 to 255 [128]
C
0 to 255 [128]
D
E
F
69
8