duxtop BT-350DZ User Manual page 12

Portable double induction cooktop
Table of Contents

Advertisement

POWER MODE vs. TEMPERATURE MODE
Switching between Power Mode and Temperature Mode is accomplished by pressing the "MENU" button.
If a specifi c cooking temperature is not required, we suggest using Power Mode instead of
Temperature Mode. To quickly bring a pot of water to boil, use a higher power level setting or
simply press the "BOIL" button. For frying or browning food, Temperature Mode is preferred
because the built-in microprocessor monitors and regulates the cookware temperature to the
preset temperature. Frying or browning food using Power Mode may overheat the cookware, and in
some cases, extremely high temperatures may damage your cookware or cooktop. The duxtop(c)
induction cooktop has a built-in safety mechanism to detect such situations and the unit can switch
to Temperature Mode from Power Mode automatically when overheating is detected. When this
happens it is an indication that Temperature Mode may be more suitable for your current cooking
task. When two burners are in Temperature Mode, they work independently of each other and both
can reach the maximum temperature, 460 °F and will not exceed it.
Limitations of Temperature Mode:
Like all other cooktops with a glass cooktop, the temperature sensor is located underneath the
glass top. As a result, and that different cookware yields different temperatures, the temperature
readout is only an estimate of the actual cooking temperature. It is accurate enough for daily cooking
requirements. The temperature in your pan may be different than the setting you have selected.
Please test a few times to fi nd the proper temperature setting for your particular cooking task and
cookware.
Power Sharing Feature:
Power sharing technology is a safety and effi ciency feature. It is designed to avoid electrical hazards and
increase effi ciency by allowing the burners to share power between them when they are in Power Mode.
When operating only one burner, the maximum power of the left burner is 1800W and the right is
1000W. They do not have equal power.
When operating both burners, their maximum COMBINED power is 1800W. When operating both
burners at the same time, increasing the power level of one burner will cause the other burner
to self-adjust, and decrease if needed, in order not exceed 1800W. (i.e. if the left burner is set to
1000W, the right burner will operate at a maximum of 800W.)
Please refer to the table below for more details about the Power Sharing feature.
Power
Left
0.5
1.0
1.5
Level
Watts 100* 180* 260* 340* 420* 500* 580* 660* 740* 800 900 1000 1100 1200 1300
Power
Right
Level
Watts
* Average watts with power cycling.
8
Copyright 2018-2022 Secura, Inc. All rights reserved.
2.0
2.5
3.0
3.5
4.0
4.5
10.0
1000
5.0
5.5
6.0
6.5
7.0
9.0
8.0
7.0
6.0
900
800
700
600
7.5
8.0
8.5
1400
1500 1600 1700 1800
5.0
4.0
3.0
2.0
1.0
500
400 300* 200* 100*
www.duxtop.com / www.thesecura.com
9
9.5
10.0
0
0

Advertisement

Table of Contents
loading

This manual is also suitable for:

9620ls

Table of Contents