Adjusting The Monitor Settings - HP Compaq Presario,Presario CQ1569 User Manual

Table 4-1 Monitor Front Panel Controls (continued)
Control
4 Menu
5 Power

Adjusting the Monitor Settings

The monitor settings can be adjusted from the On-Screen Display (OSD) menu. To access the OSD
and adjust screen settings base on your viewing preference, do the following:
1. If the monitor is not already on, press the power button to turn on the monitor. The power indicator
will light up.
2. To access the OSD menu, press the Menu button.
3. To navigate through the Main Menu, press the – or + buttons. Once the desired function is
highlighted, press the Menu button to activate the Submenu. Press the Menu button to select the
highlighted function.
4. Press the – or + button to change the settings of the selected function. Press the – or + button to
select another function in the Submenu.
5. Press Auto/OK to select the highlighted function.
If you want to adjust any other function, repeat steps 3-4.
OSD Lock Function: This function locks the OSD in order to keep the current menu settings or prevent
others from adjusting the current settings.
●
To lock the OSD, press and hold the Menu button for 10 seconds.
●
To unlock the OSD, press and hold the Menu button for 10 seconds.
Power Button Lockout: Indicates the power button is locked. If the power button is locked, the warning
message Power Button Lockout displays.
●
If the power button is locked, press and hold the power button for 10 seconds to unlock the power
button function.
●
If the power button is unlocked, press and hold the power button for 10 seconds to lock out the
power button function.
Volume adjustment hot key: When the OSD window is closed, press + or – to activate the volume
adjustment bar, and then press – or + to adjust the volume (only for the models with speakers).
Auto-Adjustment hot key: When the OSD window is closed, press the Auto button to activate the
auto-adjustment feature to optimize the screen image.
12 Chapter 4 Operating the Monitor
Function
Press to open the OSD window.
Turns the monitor on and off.
LED status:
●
Full Power Mode - Green or Blue
● Active-off Mode - Orange or Red
ENWW