Setting The Battery Protection Feature; Setting The Battery Cutoff Voltage Feature; Setting The Battery Protection Feature For Wintertime - Thinkware F200 User Manual

Settings

6.3.6 Setting the battery protection feature

You can set to use the battery protection feature. Follow the instructions to activate the feature.
1
From the mobile viewer, tap Dash Cam Settings
2
From Battery Protection, select Enabled or Disabled. The new setting is applied automatically.

6.3.7 Setting the battery cutoff voltage feature

You can set the voltage limit to stop recording at when using the Low Voltage Off feature. Refer to the
following instructions to set the voltage.
If the Off voltage value is too low, the product may consume the battery completely depending on the
conditions like the vehicle type or temperature.
The battery cutoff voltage can be set only when the Battery Protection setting is set to Enabled.
1
From the mobile viewer, tap Dash Cam Settings
2
From 12V or 24V, select the desired voltage.
For vehicles using a 12 V battery (most passenger vehicles), configure the 12V setting. For vehicles
using the 24 V battery (trucks and commercial vehicles), adjust the 24V setting. The new setting is
applied automatically.

6.3.8 Setting the battery protection feature for wintertime

You can set the month(s) during the cold season to apply the low voltage protection level of the vehicle.
Refer to the following instructions to set the month(s).
1
From the mobile viewer, tap Dash Cam Settings
2
From Wintertime Battery Protection, select the month(s) to apply the battery protection feature. The
new setting is applied automatically.
36
Record Settings.
>
Record Settings.
>
Record Settings.
>