To close the seat
1. Fold the seat down, and then push
it down to lock it in place.
2. Remove the key from the main
switch if the scooter will be left un-
attended.
NOTE:
Make sure that the seat is properly se-
cured before riding.
INSTRUMENT AND CONTROL FUNCTIONS
Adjusting the rider backrest
The rider backrest can be adjusted to
the two different positions shown.
1
1. Rider backrest
Adjust the backrest as follows.
1. Open the seat. (See page 3-10.)
2. Remove the backrest bolts.
3-11
EAU38120
1
2
1. Rider backrest
2. Bolt
3. Slide the backrest forward or back-
ward to the desired position.
4. Install and securely tighten the
backrest bolts.
5. Close the seat.
2
2
3
4
5
6
7
8
9