Table of Contents
Advertisement
Preparing the Refrigerator for Storage
If the refrigerator will not be used for a long time, or is to be moved to another place, it will be necessary to
defrost the unit and dry the interior.
1. Disconnect the refrigerator from the power supply by removing the power plug from the wall socket.
2. Leave the door open to allow for air circulation and to prevent mold, mildew, and unpleasant smells.
3. Once the interior is dry and clean the unit will be ready for storage.
Caution: Store the unit out of reach from children. If you have children, you may want to take
additional precautions such as removing the door to prevent a child from being trapped inside the
!
refrigerator.
Important:
• Do not touch the power plug when your hands are wet.
!
• Never unplug the unit by pulling on the cord.
Cleaning and Maintenance
Periodic cleaning and proper maintenance will ensure efficiency, top performance, and long life.
Exterior Cleaning
The door and cabinet may be cleaned with a mild detergent and lukewarm water solution such as 2 tablespoons
of baking soda to 1 quart of water.
Do not use solvent based or abrasive cleaners. Use a soft sponge and rinse with clean water. Wipe with a soft
clean towel to prevent water spotting. If the door panel is stainless steel, it can discolor when exposed to chlorine
gas and moisture. Clean stainless steel using a cloth dampened with a mild detergent and warm water solution.
Never use an abrasive or caustic cleaning agent.
Interior Cleaning
The refrigerator's interior should be cleaned occasionally.
1. Disconnect power to the unit.
2. Open the door and remove the contents and shelves.
3. Wait until the unit defrosts.
4. With a clean cloth, wipe down the interior of the unit.
5. Reinsert the shelves and contents.
6. Reconnect power to the unit.
16
Advertisement
Table of Contents
