Installing The Door Handle; Installing The Casters - Avallon AFR152SSODRH Owner's Manual

Installing the Door Handle

To install the door handle:
1. Open the door and carefully pull the door gasket around the area where the handle is to be installed.
2. Insert each Phillips head screw through the gasket side of the door until the screw passes through the door.
3. Align the handle with the screws and tighten using a Phillips head screwdriver until the handle is flush
against the door frame.
4. Carefully press the door gasket into its original position.
Caution: Do not over-tighten the screws as this may cause damage to the handle or to the stainless
!
steel door.

Installing the Casters

This unit comes with four (4) casters. These are an optional accessary to assemble if you would like to make
the unit more mobile. To install the casters:
1. Carefully lower the refrigerator onto a soft surface such as a blanket.
2. Separate the front casters and back casters. The front casters have a lever for a brake lock.
3. Place the top plate of the caster over the area of the removed leveling leg and align the opening to the
screw hole openings.
4. Insert the screws to attach the caster to the cabinet.
5. Make sure the screws are tight so the caster is installed firmly.
11