Spoke Wheels; Adjusting The Clutch Lever Free Play - Yamaha V-Star XVS250S Owner's Manual

Table of Contents

Advertisement

PERIODIC MAINTENANCE AND MINOR REPAIR
WARNING
G
It is dangerous to ride with a
worn-out tire. When a tire tread
begins to show crosswise lines,
have a Yamaha dealer replace
the tire immediately.
G
The replacement of all wheel-
and brake-related parts, includ-
ing the tires, should be left to a
Yamaha dealer, who has the
necessary professional knowl-
edge and experience.
G
It is not recommended to patch
a punctured tube. If unavoid-
6
able, however, patch the tube
very carefully and replace it as
soon as possible with a high-
quality product.
EWA10560

Spoke wheels

To maximize the performance, durabil-
ity, and safe operation of your motor-
cycle,
note
the
regarding the specified wheels.
G
The wheel rims should be checked
for cracks, bends or warpage, and
the spokes for looseness or dam-
age before each ride. If any dam-
age is found, have a Yamaha
dealer replace the wheel. Do not
attempt even the smallest repair to
the wheel. A deformed or cracked
wheel must be replaced.
G
The wheel should be balanced
whenever either the tire or wheel
has been changed or replaced. An
unbalanced wheel can result in
poor performance, adverse han-
dling characteristics, and a short-
ened tire life.
G
Ride at moderate speeds after
changing a tire since the tire sur-
face must first be "broken in" for it
to develop its optimal characteris-
tics.
EAU21940
Adjusting the clutch lever free
play
following
points
1. Locknut
2. Clutch lever free play adjusting bolt
3. Clutch lever free play
The clutch lever free play should mea-
sure 5.0–10.0 mm (0.20–0.39 in) as
shown. Periodically check the clutch le-
ver free play and, if necessary, adjust it
as follows.
1. Loosen the locknut at the clutch le-
2. To increase the clutch lever free
6-15
ver.
play, turn the adjusting bolt in di-
rection (a). To decrease the clutch
lever free play, turn the adjusting
bolt in direction (b).
EAU22040

Advertisement

Table of Contents
loading

Table of Contents