Table of Contents
Advertisement
The lamp does not flash
during battery pack
charging.
Operation disabled
since the "CAM"/
"MEDIA" lamp and the
ACCESS lamp are
blinking.
This unit heats up.
Warning Indications
Warning Indications
RECORDING FAILURE
DATA RECORDED FILE IS
TOO SMALL TO BE SAVED
MEMORY CARD ERROR!
Check the remaining battery power.
0
(When the battery pack is fully charged,
the lamp does not flash.)
When charging in either a hot or cold
0
environment, ensure that battery is
being charged within the permitted
temperature range. (Otherwise,
charging may stop to protect the battery
pack.)
Remove the battery and AC adapter.
0
Then, attach the battery and AC adapter
again, and turn on the power. If these
operations won't solve the problem,
contact your JVC dealer or the JVC
service center.
This is not a malfunction. (This unit may
0
become warm when used for a long
time.)
Action
Turn off and on this unit again.
0
If the above does not solve the problem,
0
back up your files and execute
"FORMAT SD CARD" in the "MEDIA
SETTINGS" menu. (All data will be
deleted.)
When "TIME-LAPSE RECORDING" is
0
stopped with the recorded time less
than "0:00:00:14", the video will not be
saved.
Turn off and on this unit again.
0
Remove the AC adapter and battery
0
pack, then remove and re-insert the SD
card.
Remove any dirt from the SD card
0
terminals.
If the above does not solve the problem,
0
back up your files and execute
"FORMAT SD CARD" in the "MEDIA
SETTINGS" menu. (All data will be
deleted.)
11
-
11
-
-
Page
-
-
-
-
-
-
-
27
EN
Advertisement
Chapters
Table of Contents
