Inserting An Sd Card - JVC JY-HM90 Basic User's Manual

Inserting an SD Card

Insert a commercially available SD card before recording.
This unit comes with two SD card slots. When two SD cards are inserted and "SEAMLESS
RECORDING" in the "RECORD SETTING" menu is set to "ON", recordings can be
continued on the other card even if one card is full or error occurs on one card.
Set the "STANDBY/ON
OFF" switch to "OFF".
Turn off the power of this unit before
※
inserting or removing a SD card.
.
Slot status indicating lamp
o
Indicates each status of slot A and slot B.
Lamp
Blinks Accessing the SD card that was inserted. (Data writing/reading in progress)
Do not turn off this unit or remove the SD card.
Lights up Standby condition. You can perform recording or playback using the SD card
that was inserted.
Goes off SD card not inserted.
Unusable SD card is inserted.
To remove the card
o
Push the card inward once, then pull it out straight.
Open the door.
Slide the "DOOR LOCK" lever to
the left, and pull the door
towards you.
Insert an SD card into slot A.
Label
Close the door.
After closing the door, slide the
"DOOR LOCK" lever to the right
to lock the door.
Slot status
13
EN