Table of Contents
Advertisement
Sleep Timeout
Suspend Timeout
Suspend-to-disk
Power Button...
Lid Switch...
Ring Resume
Resume Timer...
Alarm Resume
Resume Time
CPU COOLING
MODES...
Exit Menu
Save and Reboot...
Exit (No Save)...
Default Settings...
Restore Settings...
BIOS Revision...
Configuring and Expanding Your Computer
Using the BIOS Setup Utility
Sets the period of inactivity after which the computer
turns off LCD panel and hard disks and minimal CPU
support
Sets the period of inactivity after which the computer
enters suspend mode.
Sets the period of disk inactivity after which the
computer enters suspend mode.
Configures power button to power the unit on and off
the unit or to enter power-saving suspend/resume.
Configures the lid switch to turn off the LCD display or
to enter power-saving suspend.
Sets whether the system resumes from Suspend if a
ring signal is received.
Enables timer features for resuming at a specified date
and time.
Sets whether the system resumes from Suspend at a
defined time of day.
Sets the 24-hour time and date when the system
resumes from Suspend if enabled.
Sets mode for reduction of CPU temperature to
Performance (more cooling) or Silence (less cooling).
Saves Setup changes to CMOS, exits, and reboots.
Discards Setup changes since last save, exits, and
reboots. Does not affect security, date, or time changes.
Reloads default setting to CMOS.
Restores current setup to original custom values.
Reports the current BIOS version number.
78
Setup Guide
2 minutes
2 minutes
1 hour
Suspend/Resume
Turn Off LCD
Off
Disable
Performance
Hide quick links:
Advertisement
Table of Contents
