4.
Remove the display assembly (4).
5.
If it is necessary to replace the display bezel or any of the display assembly subcomponents:
a.
Remove the Mylar screw covers (1) and the two Phillips PM2.5×6.0 screws (2) that secure
the display bezel to the display assembly.
b.
Flex the inside edges of the top edge (1), the left and right sides (2), and the bottom edge
(3) of the display bezel until the bezel disengages from the display enclosure.
Component replacement procedures
83
Need help?
Do you have a question about the Pavilion G4-1010 and is the answer not in the manual?