Table of Contents
Advertisement
q
w
r
z x c v b n
m ,
e
Button Sewing
q Stitch pattern:
w Needle thread tension:
e Presser foot:
r Feed dog:
z Lower the feed dog.
x Match the holes of button to the horizontal slot on the
presser foot.
c Lower the foot to hold the button in place.
v Adjust the stitch width so the needle will enter the left
hole of the button.
b Turn the handwheel so that the needle will enter the
right hole of the button. Readjust the stitch width if
necessary.
n Stitch several times.
m After you finish sewing, cut the threads but leave 8 -
10 cm of threads at the end.
, With a hand sewing needle, draw the top thread to the
reverse side of the fabric and knot the threads.
* After the button sewing is completed, raise the feed
dog for normal sewing.
31
06
3 to 7
Satin stitch foot F
Dropped
Advertisement
Table of Contents
