b.
Release the display panel cable from the clips (2) built into the display enclosure.
c.
Remove the display panel cable. The display panel cable includes the webcam/microphone
module cable and is available in the Display Cable Kit, using the following spare part
numbers:
●
●
●
10.
If it is necessary to replace the wireless antenna cables and transceivers:
a.
Release the wireless antenna transceivers (1) from the display enclosure. (The wireless
antenna transceivers are attached to the display enclosure with double-sided tape.)
b.
Release the wireless antenna cables from the clips (2) built into the display enclosure.
110
Chapter 4 Removal and replacement procedures
656805-001 — For use only with computer models equipped with a FHD display
assembly
644362-001 — For use only with computer models in dark umber and steel gray finish
640423-001 — For use only with computer models in butter gold, espresso black, linen
white, Pacific blue, pearl pink, ruby red, and Sonoma red finish