Table of Contents
Advertisement
Audio
Cannot hear the desired audio.
Check the connections and the "Digital Audio
Output" settings. (
When the unit is connected to an amplifier/
receiver with the 2ch AUDIO OUT/7.1ch
AUDIO OUT terminals, set "Analogue Audio
Output". (
32)
To output audio from a device connected with
an HDMI cable, set "Audio Output" to "On" in
the Setup menu. (
When connecting this unit to a TV via an
HDMI VIDEO OUT and to an amplifier/
receiver via an HDMI AUDIO OUT, set
"HDMI(VIDEO) Output Mode" to "Automatic
( Video Only / Video+Audio )". (
Even when gapless playback is performed for
an album or similar group of songs containing
a sound source recorded at a live
performance or concert (a music file
containing songs that are recorded
continuously), the playback is interrupted
between songs.
In the following cases, playback is interrupted
between songs:
– When the file contains recordings that differ
from one another in their settings, such as
file format, sampling frequency, and
channel number
– When you set "Repeat Play" to "One track"
or "Shuffle" to "On" during gapless playback
– When files of 100 or more songs are
contained in a single folder
11, 31)
30)
11, 29)
Reference
There is no sound coming out.
To output audio using OPTICAL terminal, set
"OPTICAL Down Sampling" properly. (
Refer to "Connecting to an amplifier/receiver"
(
11 - 15) to check the audio output settings
suited to the connections of your device.
In the following cases, audio is not output
from the terminals listed below:
≥HDMI VIDEO OUT terminal
– When a device is connected to the HDMI
AUDIO OUT terminal and "HDMI(VIDEO)
Output Mode" is set to "Automatic ( Video
Only / Video+Audio )" (
– When "Audio Output" in "Advanced
Settings" is set to "Off" (
– While playback is being performed with
"Audio Output" in "Settings for High Clarity
Sound" set to "OPTICAL Only" (
– When "Analogue Audio Output" is set to
"7.1ch" or "2ch (Downmix)" (
≥HDMI AUDIO OUT terminal
– When "Audio Output" in "Advanced
Settings" is set to "Off" (
– While playback is being performed with
"Audio Output" in "Settings for High Clarity
Sound" set to "OPTICAL Only" (
– When "Analogue Audio Output" is set to
"7.1ch" or "2ch (Downmix)" (
≥OPTICAL terminal
– When a device is connected to the HDMI
AUDIO OUT terminal and "Audio Output" in
"Advanced Settings" is set to "On" (
– While playback is being performed with
"Audio Output" in "Settings for High Clarity
Sound" set to "HDMI Only" or "Analogue
Only" (
32)
≥Analogue AUDIO OUT terminals
– While playback is being performed with
"Audio Output" in "Settings for High Clarity
Sound" set to "OPTICAL Only" (
– When "Analogue Audio Output" is set to
"Off" (
32)
- 39 -
31)
29)
30)
32)
32)
30)
32)
32)
30)
32)
Advertisement
Table of Contents
