Table of Contents
Advertisement
Search for wireless network:
≥ The available wireless networks will be
displayed on the screen.
Select your network name.
– If your network name is not displayed,
search again by pressing the red button on
the remote control.
– Stealth SSID will not be displayed when
you press the red button on the remote
control.
Enter manually by using "Manual setting".
(
33)
≥ If your wireless network is encrypted,
Encryption Key input screen will be
displayed.
Input the encryption key of your network.
≥ Refer to the operating instructions of the hub or router.
≥ Do not use this unit to connect to any wireless network for
which you do not have usage rights.
Using these networks may be regarded as illegal
access.
≥ If you have trouble getting online on your PC after
performing network settings on this unit, perform the
network settings on your PC.
≥ Please be aware that connecting to a network without
encryption may result in the leaking of data such as
personal or secret information.
An SSID (Service Set IDentification) is a name used by
*1
wireless LAN to identify a particular network. Transmission
is possible if the SSID matches for both devices.
The PUSH button method is a connection method which
*2
allows you to set encryption for a wireless LAN connection
with ease.
You can connect to a wireless LAN network by pressing a
certain button on the wireless access point [Link button,
WPS (Wi-Fi Protected Setup
Getting started
) button, etc.].
TM
Firmware updates
This unit is capable of checking the firmware
automatically when connected to the Internet via
a broadband connection.*
When a new firmware version is available, the
following message is displayed.
New Version: X.XX
Current Installed Version: X.XX
Do you want to start firmware update?
For the update information, please visit the
following website:
http://panasonic.net/support/
Yes
Select "Yes" to start downloading the firmware.
When the firmware update starts after the
downloading is finished, a black screen is
displayed.
You cannot operate the unit until the update is
complete. Don't remove the AC mains lead during
the update. Removing the AC mains lead while
the update is in progress may damage the unit.
After the firmware is installed, unit will restart and
the following screen will be displayed.
The firmware has been updated.
Current Version
≥ You can also download the latest firmware from the
following website and store it to a USB device to
update the firmware.
https://panasonic.jp/support/global/cs/
(This site is in English only.)
≥ To show the firmware version on this unit. (
"Firmware Version Information")
≥ Downloading will require several minutes. It may take
longer or may not work properly depending on the
connection environment.
You must agree to the terms of use for the Internet function
*3
and the privacy policy. (
"X.XX" represents the firmware version number.
*4
- 18 -
3
Firmware Update
No
OK
RETURN
: x.xx
34, "Legal Notices")
4
4
35,
Advertisement
Table of Contents
