Table of Contents
Advertisement
Setup menu
Reference
Change the unit's settings if necessary. The
settings remain intact even if you switch the unit
to standby.
1
Press [HOME].
2
Select "Setup".
3
Select "Player Settings".
Player Settings
Video Format
HDMI
4K(50p/60p) Output
Picture
24p Output
HDMI(VIDEO) Output Mode
Sound
HDMI(AUDIO) Output Mode
3D
Dolby Vision Setting
HDR10+ Setting
Language
Advanced Settings
Network
Ratings
System
OK
RETURN
4
Select an item and change the settings.
To exit the screen
Press [HOME].
HDMI
∫ Video Format
The items supported by the connected devices
are indicated on the screen as "¢". When any
item without "¢" is selected, the images may be
distorted.
≥ If "Automatic"*
is selected, the best suited
1
output resolution to the connected TV is
automatically selected.
∫ 4K(50p/60p) Output
This unit automatically chooses to output images
in 4K*
(50p/60p) when connected to a 4K (50p or
2
60p) compatible TV.
≥ This item is available only when "Video Format"
is set to "Automatic" and "4K".
≥ This item is not available when "HDMI(AUDIO)
Output Mode" is set to "Video+Audio".
≥ To connect to a TV that supports 4K (50p/60p)
4:4:4/8 bit or 4K (50p/60p) 4:2:2/12 bit, select
"4K(50p/60p) 4:4:4".
Images will not be output correctly with an
HDMI cable that does not support 18 Gbps.
≥ To connect to a TV that supports 4K (50p/60p)
4:2:0/8 bit, select "4K(50p/60p) 4:2:0".
Reference
∫ 24p Output
Content recorded at 24p*
films, is output at 24p when played back.
≥ When this unit is connected to TV compatible
with 4K/24p and "Video Format" is set to
"Automatic" or "4K", images will be output in 4K/
24p.
≥ When this unit is connected to a TV compatible
with 1080/24p and "Video Format" is set to
"Automatic", "1080i" or "1080p", images will be
output in 1080/24p.
≥ If images output in 24p are distorted, change
Automatic
Off
the setting to "Off".
Automatic
Automatic
∫ HDMI(VIDEO) Output Mode
Audio Only
Off
Set whether or not to output audio from the HDMI
On
VIDEO OUT terminal.
≥ When an amplifier is connected to the HDMI
AUDIO OUT terminal and this menu item is set
to "Automatic ( Video Only / Video+Audio )", the
TV may not output audio. In that case, select
"Video+Audio".
∫ HDMI(AUDIO) Output Mode
Set whether or not to output images from the
HDMI AUDIO OUT terminal.
≥ It is not possible to output 3D, 4K or HDR
content from the HDMI AUDIO OUT/HDMI
VIDEO OUT terminal when "Video+Audio" is
selected.
∫ Dolby Vision Setting
You can set enable/disable of the Dolby Vision
function.
By changing this setting to "On", you can use the
Dolby Vision function under the following
conditions:
– A device (TV, etc.) that supports Dolby Vision is
connected (
– A disc that supports Dolby Vision is played
back.
≥ The "Picture Settings" setting is disabled while
using the Dolby Vision function. (
≥ If all the conditions below are met, both Dolby
Vision and HDR10+ are enabled. In that case,
playback in HDR10+ format takes precedence.
– The playback media or content is recorded in
both Dolby Vision and HDR10+ formats.
– Both Dolby Vision and HDR10+ are
supported by the connected device (TV, etc.).
– Both this function and "HDR10+ Setting" are
set to "On".
- 29 -
, such as BD-Video
3
10).
27)
Advertisement
Table of Contents
