Table of Contents
Advertisement
Chapter 13
13. 14. 2. 2.4GHz/5GHz WDS
WDS (Wireless Distribution System) Bridging feature allows you to bridge a router with
an access point to extend the wireless network coverage. The access point should also
support WDS Bridging feature.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced
>
section.
•
If you want to bridge this router to an access point:
1. Enable the WDS Bridging feature.
2. Select
Station
mode.
3. Click
Survey
to scan all available networks and select the network you want to bridge.
The SSID (network name) and MAC Address will be automatically populated. You can
also manually fill in these parameters.
4. Select a
Security
the network to be bridged.
5. Click Save.
Note: You need to enable and configure the WDS Bridging feature for the access point as well.
•
If you want to bridge an access point to this router:
1. Enable the WDS Bridging feature.
2. Select
Router
mode.
3. Click Save.
System Tools
>
System
type and enter related parameters, which should be the same as
Parameters. Focus on
Manage the Router
2.4GHz/5GHz WDS
98
Advertisement
Table of Contents
