Table of Contents
Advertisement
Chapter 2
1. Connect the modem to the router's WAN port with an Ethernet cable.
2. Turn on the modem, and then wait about 2 minutes for it to restart.
3. Connect the power adapter to the router and turn on the router.
4. Verify the
LED on the top is solid on (red or blue) before moving on.
Note:
If the LED is off, press the LED button for about 1 second, and then check the LED again.
5. Connect your computer to the router.
• Method 1: Wired
Turn off the Wi-Fi on your computer and connect the devices as shown below.
• Method 2: Wirelessly
1 ) Find the SSID (Network Name) and Wireless Password printed on the label at
the bottom of the router.
2 ) Click the network icon of your computer or go to Wi-Fi Settings of your smart
device, and then select the SSID to join the network.
Computer
Connections are available
Wireless Network Connection
TP-Link_XXXX
TP-Link_XXXX_5G
Connect automatically
• Method 3: Use the WPS button
Wireless devices that support WPS, including Android phones, tablets, and most USB
network cards, can be connected to your router through this method.
Note:
• WPS is not supported by iOS devices.
• The WPS function cannot be configured if the wireless function of the router is disabled. Also, the WPS function will be
disabled if your wireless encryption is WEP. Please make sure the wireless function is enabled and is configured with
the appropriate encryption before configuring the WPS.
1 ) Tap the WPS icon on the device's screen. Here we take an Android phone for
instance.
Ethernet cable
<
Settings
Wi-Fi
CHOOSE A NETWORK...
OR
TP-Link_XXXX
Connect
TP-Link_XXXX_5G
Other...
Connect the Hardware
Smart Device
Wi-Fi
8
Advertisement
Table of Contents
