Hotel Option Menu Items - Samsung HG50NJ690U Install Manual

Hotel Option menu items

To enter this menu, press the MUTE > 1 > 1 > 9 > SelectE buttons on the remote control in order.
To exit from this menu, turn off (or turn off and unplug the power cable if you have changed SI vendor) the TV, and then
turn on again. Any changes you made are saved.
• The menu items may not be supported depending on the models.
Hotel Option menu Item
Hospitality Mode
SI Vendor
Power On Channel
Power On Channel Num
Power On Channel Type
Power On Volume
Power On
Power On Volume Num
Min Volume
Max Voume
Power On Source
Power On Option
Description
Select Hospitality Mode.
• Interactive: TV works with an SI STB or SBB.
• Standalone: TV works alone, without an SI STB or SBB.
• Interactive: Samsung / OCC / MTI / Nstreams / Enseo / Cardinal / Guestek /
SeaChange / MDC / Innvue
• Standalone: OFF / Smoovie / SSCP
Set the channel to display when the TV is turned on.
• User Defined: Lets you set the channel number manually. See Power On Channel
Num or Power On Channel Type below.
• Last Saved: If you select this item, when the TV is turned on, it displays the
channel it was displaying when it was turned off.
When the TV is turned on, it switches automatically to this channel.
Select the type of the channel will be displayed when the TV is turned on.
ATV (analog air band), DTV (digital air band), CATV (analog cable band), CDTV (digital
cable band), IPTV (IP channels).
• User Defined: Lets you set volume level manually.
• Last Saved: When the TV is turned on, it returns to the volume that had been set
when the power had been turned off.
The TV turns on with set volume level in Standalone mode.
The minimum volume level the user can set in Standalone mode.
The maximum volume level the user can set in Standalone mode.
Select the input source to display when the TV is turned on.
Determines the TV's state when power returns after a power failure or after you have
unplugged the TV and then plugged it in again.
• Last Option: Returns to its last power state. If it was in standby mode, it returns to
standby mode. If it was on, it turns on.
• Power ON: When the power returns, the TV turns on.
• Standby: When the power returns, the TV enters the standby mode.
English - 30