Setting The Soundbar; Samsung Soundbar (Airtrack) And Hospitality Tvs In 2018 - Samsung HG50NJ690U Install Manual

09 Setting the Soundbar

Samsung Soundbar (AirTrack) and Hospitality TVs in 2018

• Samsung Soundbar (AirTrack) and hospitality TVs support the HDMI ARC feature If you connect a compatible
Samsung Soundbar (AirTrack) to a compatible Samsung hospitality TV using a single HDMI cable, guests can listen
to the TV's sound through the Soundbar (AirTrack).
• Sound bar Out in Hotel Option menu makes you control to where the TV sound is outputted when the TV is turned
on.
– Hotel Option (MUTE > 1 > 1 > 9 > SelectE) > System > Sound Bar Out
• If Sound bar Out set to on, the TV sound is automatically outputted in the Soundbar (AirTrack) device only whenever
TV is turned on.
• If Sound bar Out set to off, the TV sound is automatically outputted in the TV speaker only whenever TV is turned on.
• Models supporting the ARC function are listed below:
– HW-M550/M500/M4500
– HW-N650/N550/N450
Setting the Soundbar (AirTrack) to Hotel Mode
1. Set the following options in Hotel Option (MUTE > 1 > 1 > 9 > SelectE):
– System > Sound Bar Out > ON
– Power On > Power On Volume > User Defined
– Power On > Power On Volume Num > set greater than 0
– Power On > Max Volume > set greater than 0
2. Connect an HDMI cable from the HDMI out port of the Soundbar (AirTrack) to the HDMI port (supporting ARC) on
the TV.
3. After the Soundbar (AirTrack) is connected to the TV, when the TV turns on, the Soundbar (AirTrack) automatically
detects the TV, and then automatically switches to Hotel Mode.
Soundbar (AirTrack) features in Hotel mode
• Power on / off is synchronized with the TV.
• HDMI-CEC defaults set to on
• Avaiable only through the HDMI out port.
• Disables the "Input mode" key on the VFD to prevent unexpected audio-source changes.
• Acquires adjustable Power On and Max Volume settings from the TV's Hotel Option menu. However Soundbar's
Power On Volume and Max Volume values are set to half of Power On Volume and Max Volume settings in the TV's
Hotel Option menu.
– If the TV's Power On Volume = 20 and Max Volume = 90, then Soundbar's Power On Volume = 10 and Max
Volume = 45.
• To use Voice Guide while an external device is connected to the DIGITAL AUDIO OUT (OPTICAL) or HDMI IN (ARC)
terminal, be sure to select PCM at MENUm > Sound > Expert Settings > Digital Output Audio Format.
English - 50