Table of Contents
Advertisement
Quick Links
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk
of personal injury or property damage.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
(Used without word) Indicates a safety related message.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage.
Fig. A
8
7
Trigger switch
1
Lock-off button
2
Blade clamp release lever
3
Shoe
4
Hand grip
5
Battery pack
6
Battery release button
7
Main handle
8
2
1
6
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
WARNING: To reduce the risk of injury, read the
instruction manual.
if you have any questions or comments about this or
any D
WALT tool, call us toll free at:
e
1-800-4-D
5
3
WALT (1-800-433-9258).
e
English
4
1
Advertisement
Table of Contents
Related Manuals for DeWalt DCS367B
Summary of Contents for DeWalt DCS367B
- Page 1 English Definitions: Safety Alert Symbols and Words This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk of personal injury or property damage. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
-
Page 2: General Power Tool Safety Warnings
English GENERAL POWER TOOL SAFETY WARNINGS b ) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust WARNING! Read all safety warnings and all mask, non-skid safety shoes, hard hat, or hearing instructions. Failure to follow the warnings and protection used for appropriate conditions will reduce instructions may result in electric shock, fire and/or personal injuries. -
Page 3: Additional Safety Information
English Additional Safety Information into account the working conditions and the work to be performed. Use of the power tool for WARNING: ALWAYS use safety glasses. Everyday operations different from those intended could result eyeglasses are NOT safety glasses. Also use face or in a hazardous situation. -
Page 4: Batteries And Chargers
English IPM ..... impacts per minute n o ....... no load speed • Do not incinerate the battery pack even if it is severely damaged or is completely worn out. The RPM ....revolutions per n ......rated speed battery pack can explode in a fire. Toxic fumes and minute ...... - Page 5 Use of a cord suitable for outdoor use please contact call 1-800-4-D WALT (1-800-433-9258) or reduces the risk of electric shock. visit our website www.dewalt.com. • An extension cord must have adequate wire size (AWG or American Wire Gauge) for safety. The smaller...
-
Page 6: Charger Operation
English gauge. An undersized cord will cause a drop in line voltage NOTICE: Under certain conditions, with the charger resulting in loss of power and overheating. When using plugged into the power supply, the charger can more than one extension to make up the total length, be shorted by foreign material. -
Page 7: Wall Mounting
English Important Charging Notes battery pack has reached an appropriate temperature, the yellow light will turn off and the charger will resume the 1. Longest life and best performance can be obtained if charging procedure. the battery pack is charged when the air temperature is The compatible charger(s) will not charge a faulty battery between 65 °F and 75 °F (18 °... -
Page 8: Intended Use
English INTENDED USE OPERATION This reciprocating saw is designed for professional WARNING: To reduce the risk of serious personal sawing applications. injury, turn unit off and remove the battery pack DO nOT use under wet conditions or in presence of before making any adjustments or removing/ flammable liquids or gases. - Page 9 English FIG. F Fig. I Fig. J To Install Blade into Saw 1. Pull blade clamp release lever 3 up (Fig. G). FIG. G Cutting (Fig. K–N) WARNING: Always use eye protection. All users and bystanders must wear eye protection that conforms to ANSI Z87.1.
-
Page 10: Maintenance
English Flush-To Cutting (Fig. L) Metal Cutting (Fig. N) The compact design of the saw motor housing and spindle Your saw has different metal cutting capacities depending housing permits extremely close cutting to floors, corners upon type of blade used and the metal to be cut. Use a and other difficult areas. -
Page 11: Register Online
WALT will maintain the tool and replace worn parts caused by normal use, for free, any time during the first year after purchase. 2 YEARs FREE sERViCE On DEWAlT BATTERY PACKs DC9071, DC9091, DC9096, DC9182, DC9280, DC9360, DCB120, DCB127, DCB201, DCB203, DCB203BT, DCB207, DCB361...