Table of Contents
Advertisement
1
In the case of Hydrobox
1.
Remove the back plate from
the top of the 2-zone kit.
Back plate
<Side view>
Wall
Plugs
(Local supply)
2
In the case of Hydrobox
1.
2.
Back plate
(Horizontal)
Screws
(Local supply)
2.
● Ensure that the notch is positioned at the TOP of the back
plate. The back plate is provided with screw mounting
holes that are round or oval. To prevent the 2-zone kit
from falling off the wall, choose the appropriate number of
holes or hole positions and horizontally secure the back
plate to the appropriate wall location.
1.5N·m
3.
Install the included
back plate accessory.
Secure the back plate and
the unit with M5x8 screw.
5
Advertisement
Table of Contents
