Specifications - Makita DLM380 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Dimensions (L x W x H)
Standard battery cartridge(s)
Warning: Use only the battery cartridge(s) described.
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Take particular care and attention.
Read instruction manual.
Danger; be aware of thrown objects.
The distance between the tool and
bystanders must be at least 15 m.
Never put your hands and feet near the
blade under the mower.
Remove the lock key before inspecting,
adjusting, cleaning, servicing, leaving
and storing the mower.
Cd
Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household
waste material!
In observance
Directives, on Waste Electric and
Electronic Equipment and Batteries and
Accumulators and Waste Batteries and
Accumulators and their implementation
in accordance with national laws,
electric equipment and batteries and
battery pack(s) that have reached the
end of their life must be collected
separately
environmentally compatible recycling
facility.
Model
Mowing width
No load speed
during operation
when stored
Rated voltage
Net weight
of the
and returned
1,145 mm x 465 mm x 1,023 mm - 1,070 mm
END016-5
Noise
The typical
according to 2000/14/EC:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Vibration
The vibration
determined according to EN60335:
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test method
and may be used for comparing one tool with another.
The declared vibration emission value may also be
•
European
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power
•
tool can differ from the declared emission value
depending on the ways in which the tool is used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
to an
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
2
DLM380
380 mm
-1
3,700 min
680 mm x 470 mm x 505mm
D.C. 36 V
BL1815N
14.5 kg
A-weighted noise
pA
) : 93 dB (A)
WA
Wear ear protection
total value
) : 2.5 m/s
h
2
BL1830 / BL1840
15.0 kg
ENG905-1
level determined
) : 81 dB (A)
ENG900-1
(tri-axial vector sum)
2
or less
ENG901-1