Table of Contents
Advertisement
cover (B). Put them aside.
A
4. Unscrew the screws of the right upper hinge.
Support the upper door with your hand.
Remove the upper hinge, reverse it, screw the
screws and the pin to it. Put the hinge aside.
1
5. Carefully lift the upper door from the middle
hinge to remove it. Place the upper door on the
soft surface. Be careful not to lose washers
that may stick to the door.
6. Unscrew the screw (B) and the "stop block" (A)
and screw them on the opposite side of the
door.
A
B
7. Unscrew the screws from the middle hinge.
Remove the middle hinge and put it aside
together with the screws.
Be careful not to lose washers that may stick
to the door.
8
B
2
3
1
3
2
8. Place the lower door on the soft surface.
9. Unscrew the screw (B) and the "stop block" (A)
and screw them on the opposite side of the
door.
A
B
10. Remove the hole covers of the middle hinge
and put them in the holes on the opposite side.
11. Tilt the appliance carefully on a soft foam
packaging or similar material to avoid any
damage to the back of the appliance and the
floor.
12. Remove both adjustable feet and unscrew the
screws of the lower hinge.
13. Reverse the lower hinge to the other side of the
appliance, screw it with screws and install
adjustable feet.
1
3
2
Advertisement
Table of Contents
