Keyboard screws
4. Remove the keyboard by inserting your fingertips between the top row of
keys (the F keys) and the case and then lifting. Then fold the keyboard
gently forward so that it lies upside down on the table. Do not pull up on
the keyboard. Keep the ribbon cables tucked in the case, otherwise you
will need to tuck them back in with a paper clip.
Ribbon cables
5. Handle the hard drive only by its edges to avoid damage from
electrostatic discharge.
Disengage the hard drive connectors by grasping the left Mylar flap and
pulling to the right as shown. Lift up on the Mylar sheet and remove the
hard drive. The Mylar sheet stays in place.
Hard drive screws (positions may vary)
Hard drive
Keyboard
53