Using OmniBook Plug-In Modules
The OmniBook Plug-in Modules User's Guide describes OmniBook plug-in accessory
modules and shows you how to install and use them. The plug-in module bay can
hold a DVD / floppy disk drive, a CD-ROM / floppy disk drive, a CD-ROM drive, an
LS-120 drive, a second battery, or a second hard disk drive.
This manual explains how to
Install hot-swap support.
Replace a plug-in module in the OmniBook.
Use the CD-ROM / floppy drive.
Use the LS-120 drive.
Use the DVD drive or DVD / floppy drive.
Use a second battery in the module bay.
1-6