Europe - HP OmniBook 5500 Getting Started

Europe

Products sold in Europe by Hewlett-Packard and its authorized dealers meet the
specifications listed below.
Declaration of Conformity (according to ISO/IEC Guide 22 and EN 45014)
Manufacturer:
Address:
Product name:
Options:
Safety:
EMC:
Supplementary Information:
Quality Department
Hewlett-Packard Company
Mobile Computing Division
Specifications and Regulatory Information
Hewlett-Packard Company
Hewlett-Packard Co.
Mobile Computing Division
1000 NE Circle Blvd.
Corvallis, OR 97330
declares that the following product
HP OmniBook 5500, all models
All
conforms to the following product specifications
IEC 950:1991+A1,A2 / EN 60950 (1992)+A1,A2
CISPR 22:1993 / EN 55022 (1994): Class B [1 ]
EN 55082-1:1992
IEC 801-2:1991 / prEN 55024-2 (1992): 4kV CD, 8kV AD
IEC 801-3:1984 / prEN 55024-3 (1991): 3V/m
IEC 801-4:1988 / prEN 55024-4 (1992): 0.5 kV signal lines, 1.0kV power
lines
The product herewith complies with the requirements of the Low
Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC.
The HP F1044B ac adapter used with this product is disconnected from
the power by unplugging the power cord from the power outlet or from
the ac adapter. Therefore, the power outlet should be located close to
the product and be easily accessible.
This declaration also applies to those dedicated peripherals and
modules used with the OmniBook 5500:
HP F1195A internal/external floppy disk drive
HP F1319A quad speed CD-ROM drive
HP F1044B ac/dc adapter
[1] The product was tested in a typical configuration with Hewlett-
Packard personal computer peripherals.
Regulatory Information
49