WAŻNE!
Jeśli filtr/regulator/ smarownica nie jest zainstalowany w układzie powietrznym, narzędzie pneumatyczne powinny być
smarowane co najmniej raz dziennie lub po 2 godzinach pracy z 2 do 6 kroplami oleju, w zależności od środowiska pracy,
bezpośrednio przez męskie złącze w obudowie narzędzia.
IMPORTANT!!!
If a filter/regulator/lubricator is not installed on the air system, air operated tools should be lubricated at least once a day or
after 2 hours work with 2 to 6 drops of oil, depending on the work environment, directly through the male fitting in the tool
housing .
Montaż, załadunek i obsługa
OSTRZEŻENIE: Przed użyciem należy przeczytać, zrozumieć i zastosować instrukcje bezpieczeństwa.
Standardowo przed użyciem należy spuścić ścieki ze zbiornika sprężarki powietrza i linii sprężonego powietrza.
każdego dnia (szczegółowe instrukcje można znaleźć w instrukcji obsługi sprężarki)
Assembly,Loading and operation
WARNING:
Ensure you read, understand and apply safety instructions before use.
As a standard practice,drain walter from the air compressor tank and air lines prior to use
each day(reference your compressor operators manual for detailed instructions