Advertisement
Quick Links
Advertisement
Related Manuals for Farad Super10
Summary of Contents for Farad Super10
- Page 1 Super10 Owner’s manual...
- Page 2 Important Safety Information WARNING: There are no user serviceable parts inside. Refer all servicing to qualified service personnel. WARNING: To reduce the risk of fire or electric shock, be sure that the apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed near or on the apparatus.
- Page 3 Product prior to expiration of the 24 months term, this warranty shall terminate in its entirety upon the date of such transfer. In addition, Farad Power Supplies does not warrant in any way products which are purchased from anyone who is not an Authorized Farad Power Supplies dealer or which have not been...
- Page 4 Power Supplies product, system, or service that is the source of the data or that provides access to the data.
- Page 5 Breaking in Like all devices in audio, the Farad power supply and cables will show break in behavior the first 500 hours on AC voltage. The character and quality of this supply will show immediately, but will improve during this period. Sound will become more tight, more at ease and fluent.
- Page 6 The Super10 is configured for a certain AC outlet voltage and frequency as it is manufactured. This is 100-120Vac/50-60Hz (115 at the back, figure 1, position 6) or 220-230Vac/50Hz (230 at the back, figure 1, position 6).
- Page 7 At the Farad website you can find a list of confirmed devices with proper voltage and connector ratings. If you are not sure, you can always try out with a Farad power supply, it is fully protected, so nothing will be damaged if too much current will be drawn. If it works it is ok.
- Page 8 For replacing the fuse you need to remove the top cover of the power supply. The Super10 needs a 6.3A slow blow 5x20 mm fuse for the 230Vac version and a 10A slow blow fuse for the 115Vac versions.
- Page 9 Identification of controls FIGURE 1: Front and back of the SUPER10 power supply, controls and connections Indicator LED. The front LED has several modes: Solid blue: Power supply is ready, voltage present at output Fading red: Power supply is charging supercapacitor banks at startup Flashing red: Power supply error.
- Page 10 AC voltage is present at the wall outlet. If this is the case and led still does not light up, please go to your Farad dealer or contact Farad power supplies directly.
- Page 11 Front LED stays fading red and does not turn blue at startup Error in the super capacitor charging circuit, or too low input voltage. Check power cable and AC mains power. If this is ok, please go to your dealer or contact Farad power supplies directly.
-
Page 12: Specifications
Any other voltage between 5V and 24V available on special request All specifications are an indication and valid at the time of printing of this manual. Farad power supplies reserves the right to make any changes at any time without notice.