Advertisement
Important Safety Information
WARNING: There are no user serviceable parts inside. Refer all servicing to
qualified service personnel.
WARNING: To reduce the risk of fire or electric shock, be sure that the
apparatus shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall be placed near or on the apparatus.
Do not allow foreign objects to get into the enclosure. If the unit is exposed to
moisture, or a foreign object gets into the enclosure, immediately disconnect
the power cord from the wall. Take the unit to a qualified service person for
inspection and necessary repairs.
Read all the instructions before connecting or operating the component. Keep this
manual so you can refer to these safety instructions. Heed all warnings and safety
information in these instructions and on the product itself. Follow all operating
instructions.
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
Do not place the unit on a bed, sofa, rug, or similar surface that
could block the heatsink airflow. If the component is placed in a
bookcase or cabinet, there must be ventilation of the cabinet to
allow proper cooling. Keep the component away from radiators,
heat registers, stoves, or any other appliance that produces heat.
The unit must be connected to an ac power source only of the type and voltage
specified on the rear panel of the unit as described in the chapter AC power input on
page 6. Connect the power supply to the power outlet only with an earthed IEC power
supply cable or an exact equivalent in a mains socket with protected earthing
connection.
The primary method of isolating the device from the mains supply is to disconnect the
mains plug. Ensure that the mains plug remains accessible at all times. Unplug the AC
power cord from the AC outlet if the unit will not be used for longer time.
Do not attempt to defeat grounding and/or polarization provisions. Do not use
extension cords. Do not route the power cord where it will be crushed, pinched, bent
at severe angles, exposed to heat, or damaged in any way. Pay particular attention to
the power cord at the plug and where it exits the back of the unit.
2
Advertisement
